Skip to main content
D-Line Goal and Sideline Aiming

Read the steps below and select your sport to get started

Updated over 2 years ago

At this point, you should have your camera system positioned and mounted as per our guide. Before aiming, you should:

  • Conducted a dry run to make sure your cameras are ready to use

  • Have the camera rig mounted in the correct location at your field/court

  • Have watched the video below on adjusting cameras

  • Reach out to Spiideo Installations 48 hours prior to your aiming. You can do this via the chat bot in your installer link

When you are ready, you can use the installer link contained in your shipping email to aim the cameras. The installer link allows you to:

  • See the IP address for each camera

  • Confirm your cameras have network and power

  • See each camera view on your scene in order to aim them accurately

It is important to take a laptop/tablet/phone with you when aiming in order to use the installer link.


To read more about the installer link, click here.

Please note: If you do not see the live view of a camera, it does not have network/power connection


Choose your field type:

Football (Soccer)

Sideline

Select the distance that applies to your mounting and then follow the step by step instructions below:

Close (1-5 metres)

Steps relate to letters A through C in the images above:

  • Make sure camera rig is level

  • A - Make sure the camera captures all the corners.

  • B - Make sure the camera captures the full near sideline with minimal distance outside the field.

  • C - Then make sure you have as much room over the far sideline a possible.

Goal Camera

Select the distance that applies to your mounting and then follow the step by step instructions below:

Close (1-5 metres)

Steps relate to letters A through C in the images above:

  • Make sure camera rig is level

  • A - Make sure that the camera captures the corners.

  • B - Make sure the camera captures all of the goal line.

  • C - Make sure you get the full field in view.

Next Steps

Once your cameras are aimed, we will run a first time calibration and notify you through the installation chat when your scene is ready to record. You should then:

  • Give recording access to yourself and any other admins that wish to record

  • Start your first recording! How to here

  • Reach out to customer support via the chat with any further questions

Did this answer your question?