Use CloudLink with AutoFollow

Start a new CloudLink session with AutoFollow

Updated over a week ago

Below is a step-by-step process to receive a CloudLink feed with AutoFollow to your external program via RTSP

Step 1: Check your Scene is Ready for CloudLink RTSP

  • Navigate to your scenes tab in Spiideo Perform

  • The highlighted column 'CloudLink Ready' will reflect a green tick if your scene is available for CloudLink RTSP

  • If you do not see this, you should reach out to Spiideo Support

Step 2: Start a Recording in Spiideo Perform

  • Open the Spiideo Perform web app and start a recording on your scene

  • If you are unfamiliar with any step to start a recording, you can watch a video here for a refresher.

Step 3: Access the RTSP Link

You can now click 'Live Tagging' on your live recording

Click the 'i' in the top right and then 'CloudLink'

  • Selecting 'CloudLink' will open the above screen to generate an RTSP link

  • This link is unique to each recording and the above process should be followed every time a new recording is started for CloudLink

Step 4: Add the RTSP information to your external program

With the copied RTSP link, you can now add this into your external program. The following is an example of opening a CloudLink recording in VLC:

Has your question not been answered from the above information? Please reach out to Support via the chat in the bottom right corner.

Did this answer your question?